|
Week of March 14, 2010
JungleFlasher v0.1.73
>> Team Jungle released a new version (v0.1.73) of JungleFlasher(info) compatible with the latest version of C4eva's iXtreme LT.
What's new/fixed:
* Lite-On, Benq LT ver 1.1 Support.
* General Support
Better support for 125% / 120dpi in win 7
Bad DevID trap, Message to disable MRA mod and continue.
Links in IRC browser tab will load to default browser rather than IE
* DVDKey32(info)
Reg setting Delay32 adjustable from GUI, right click DVDkey32 button.
This will delay key extract to allow time to position probe.
See ver 0.1.59 nfo.
* LO-Erase
ESC to cancel failing intro after LO-Erase
* Bad Sammy-Un-Lock Key fix
Will launch automatically on see symptoms... CTRL + SHIFt + F10 still works
Dummy from IX
Trap added to fail if key appears as regular inquiry data 05 80 00 32.......
Official Site: http://twitter.com/TeamJungle | http://www.jungleflasher.net
Download JungleFlasher v0.1.73: here
Discuss this news item on our forums: forums.xbox-scene.com
C4eva BenQ and LiteOn iXtreme LT v1.1
>> C4eva presents, in association with Team Jungle and TeamXecuter: BenQ iXtreme LT v1.1 and LiteOn iXtreme LT v1.1.
What's new/fixed (according to JungleJim):
* Liteon v1.1: improved media recognition for those with dirty disc error
* Benq v1.1: bug fix [KNOWN security vulnerability] ... this is a must update
Official Site: twitter page
Download iXtreme LT v1.1: n/a (might be illegal under DMCA/EUCD)
Discuss this news item on our forums: forums.xbox-scene.com
XM360 v1.3b
>> Node21 (Team XeDev) released a new version of XM360.
What's new/fixed (since v1.2):
* Added support for ntpd. Each time you launch XM360, it will update the 360's clock (if it can connect to the ntpd) - Big Thanks to Ced2911 of team xedev!
* Added ability to configure the IP of the ntpd server (see the cfg file for more details)
* Added time display to first page
* Because some people may now use XM360 *only* to set their clock, it no longer automatically scans when starting up
* Added support for an extra path to search for XBLA titles instead of only the built in ones. See the cfg file for more details.
* The report generated for DLC now clearly indicates DLC which you have but wasn't found when scraping the marketplace.
* Fixed focus stuck on list if you moved there before scanning
* If your startup time is very long, it's because XM360 is trying to reach the time server and can't. Either figure out why that is, and fix it, or set your TIME_SERVER_IP to be empty in the config file and setting the time will be skipped.
* Fixed EXTRA_XBLA_SEARCH_PATH not working (it was working, but erroneously stated that it needed a trailing slash)
Official Site: http://xedev.xbins.org/
Download: n/a (built with XDK)
Discuss this news item on our forums: forums.xbox-scene.com
Xecuter NAND-X
>> From team-xecuter.com:
[QUOTE]
First of all let us congratulate the winner of the product naming competition. Well done to xellaphan from New Jersey, USA for giving us the simple and yet obviously descriptive XECUTER NAND-X. Probably the easiest $1000 that guy has ever made ;) There were several thousand entries so thanks to everyone that gave it a go. Thanks also for giving us the chance to give a little back to the scene members. Sure you get the complainers and the trolls but luckily they are a lonely minority. The majority give great feedback and also give us many ideas to implement into products. There were many cool ideas in there for future products - if we ever use someones idea we will definitely make sure it's rewarded. If you don't like the name - then you can send a complaint email to wedontcare@team-xecuter.com ;)
Now, for several weeks we have been discussing our toying with 360 homebrew and we were asked by many forum members to design a high quality USB NAND programmer and JTAG connection kit in all all-in-one package. There are quite a few good kits already available on the market but there wasn't one that gave a complete professional solution so that's where the XECUTER NAND-X comes in. Based on the proven and excellent NAND PRO USB Programmer designed by illustrious scene member Tiros, we have developed a very tight package that gives you everything you need without having to use any other parts or self-made cables and kits - and certainly without breaking the bank! Not only do we provide one of the fastest 360 NAND programmers currently available, but we have designed a very simple connection system using our popular and much used quicksolder PCB breakout boards - and as a bonus we have also integrated a programmer so you are able to update the firmware of the ARM Controller to make sure you can keep up to date with future new features and upgrades. We've also included an optional pin header cable system just like the old XBOX LPC Days :)
Naturally, we will also be offering all of the NAND & JTAG Connection Kits seperatley for bulk installers - and the price of these will be very cheap, much like the LT Switch deals. Also included is the ability to program the onboard ARM controller so it is future proofed for any firmware updates. So you can be sure that you will have the ability to stay on top of new features or improvements in the USB flashing code.
So why buy Xecuter ? With over 10 years of hardware and software development experience in the video games industry, and over 180 products manufactured and distributed globally, Xecuter are the brand that you can rely on to bring you quality, innovation, affordability - and most importantly - TRUST. All our products are backed by a resellers warranty. We take pride in our product and we stand by everything we do. There is only one thing more important than the product and that's keeping you the customer happy. Our award winning factory ensures the most stringent quality control procedures so you can be sure of the very highest standards. We have also invested heavily on cost effective measures enabling us to pass savings on to you, the customer.
Here is a brief run down of the NAND-X's features:
* Fast USB 360 NAND Programming
* Rock Solid 60Mhz ARM Controller
* Easy Install System for both NAND and JTAG
* Includes Quick Solder Connection Kit For NAND
* Includes Quick Solder Connection Kit For JTAG Hack (All Version Motherboards)
* Includes Optional Pin Header Connection Kit For NAND
* Includes Optional Pin Header Connection Kit For JTAG Hack (All Version Motherboards)
* Built-in Programmer For Future NAND-X Firmware Upgrades (Windows App Available)
* Designed For Additional Add-ons
* Proven Technology - Based On NAND Pro Design
* 100% Compatible with NAND Pro v2.0e
* Rock Solid Design - Tested by many JTAGER'S
* High Quality & Trusted Xecuter Design
* Complete with ALL cables required including USB
* Multiple NAND & JTAG Connection Kits Sold Separately for Bulk Installers (Will be cheap - like LT Switch)
* Affordable - We Provide You With More For Less !
Production has now begun so we expect retailers to begin receiving stock at the end of March / beginning of April. RRP is set at around £24.95 / $34.95 however we are told that there will be some of our resellers doing a special promotional price of just £19.95 / $29.95 for the first couple of weeks so watch out for those promotions! Full installation diagrams and instructions will be available shortly. If you do see one of our resellers offering pre-orders, only do so after you have seen the installation diagram because some people always try to make trouble on some forums talking trash like we are trying to hide something. Don't listen to idiots - trust 10 years of skills from guys who actually know their stuff. The install points are the same as all current methods (NAND points J1D2, J2B1, & JTAG points J2D2, J1F1), we're preparing some nice tutorials right now.
This is a picture of our original prototype unit that we posted on the forums a few weeks back. naturally a lot has changed as this is about 5 weeks old but we'll get some nice images together for you over the weekend :)
Truth be told we are having a blast with homebrew. It's like the old days again and this is only the beginning ;) For the last couple of months now some of our old team members from the XBOX 1 glory days have begun to stir and there are now 14 New projects currently in development at our factory so you can be sure of many new and exciting products to get your teeth into in the very near future :)
Thanks to the following who are actively involved in the 360 Homebrew scene. These guys deserve all your support !!
[/QUOTE]
Official Site: http://team-xecuter.com
Discuss this news item on our forums: forums.xbox-scene.com
Cygnos360 v2 Rev. F - big block NAND version and Toolbox v1.09
>> From cygnos360.com:
[QUOTE]
The new version is now able to read and program also the so called "big block NANDs" which are the 256Mb and 512Mb mainboard versions if the Xbox360. In addition to the added support for big blocks the new version ads more quicksolder pads which means less cables are required. Cygnos360 V2 Ref F fits nicely onto the underside of the Xbox360 mainboards and connects to the Jtag port via quicksolders (no resistors or cables needed here) Take a look at the photo, you will see on the top right the new quicksolder pads that sit directly on the jtag port.)
The new version does not carry a secondary NAND anymore so it is a single flasher, not a dual NAND. The reasons for this are, you don't really need the dual NAND feature anymore on the home brew stuff and it allows us to make one version that fits all Xbox 360 versions.
Cygnos 360 V2 is now available for Xenon, Opus, Falcon, Zephyr, as well as all different Jasper versions (16, 256 & 512).
Our tests show very fast programming and reading times. Reading a full 512Mb image takes less than 10 minutes, a 16Mb image less than 2 minutes. The images created are highly reliable as we have implemented error checking during the transfer.
The Cygnos360 V2 is faster, more reliable and easier to install than any alternative solutions. It is now in its 6th revision and we are proud to used each step to make it more perfect.
Revision F is already on the way to some of our resellers which will stock them end of this week. Next week more stores are going to follow.
We have also release a new version of the toolbox (Version 1.09, see the download section)
[/QUOTE]
Official Site: http://www.cygnos360.com
Discuss this news item on our forums: forums.xbox-scene.com
Yaris-Swap v0.9 Beta3
>> Zouzzz released Yaris-Swap v0.9 Beta3 "ChitOtest Edition".
What's new/fixed:
* Enable de la RichtexBox in ReadOnly
* Resizing ViewList.
* Add a panel Profile Info with ID profile, hardware, gamertag, XUID, icon ...
* Add a button Donate for the generous donors
* Add a button About with thanks, changelogs (in French)...
* Add DeviceID and ProfileID for CON files in ViewList
* resign CON files now possible (mass resign)
* ID XUID : now good length 0x8 against 0x6 in previous versions
Official Site/Download: hb-released.com
Discuss this news item on our forums: forums.xbox-scene.com
ISO2GOD v1.3.0
>> KrK / Team 360h released a version of ISO2GOD, a PC app for converting Xbox 360 ISO images straight into Games on Demand containers.
What's new/fixed:
+ Support for conversion of Xbox1 ISO images.
Now that it's possible to execute Xbox XBEs using the Xbox1 emulator, it seemed like a good time to add in support for Xbox1 ISO conversion to Iso2God.
Xbox1 titles cannot be run from Games on Demand containers, but thanks to some hard work by rab, it turns out they run just fine when launched from an Xbox Originals container which use a different content type of 0x00005000. Keep in mind if the default.xbe for the Xbox1 ISO has been altered in any way, or is not on the official compatibility list, you'll need to use the modified Xbox1 emulator which was leaked recently. Not all titles will work 100% as they will only work if the emulator supports them.
Thanks go out to rab for his work in getting Xbox titles up and running from GOD containers and the large amounts of testing he ends up doing for I2G.
~ Changed starting sector of rebuilt ISOs to match SDK.
~ Fixed handling of Unicode characters in Title Names.
~ Fixed issue when custom thumbnails were loaded.
~ Fixed error when a queued conversion with no thumbnail was edited.
~ Lots of other boring tweaks and fixes.
Official Site: n/a, by KrK/Team 360h
Download: here
News-Source: xboxhacker.org
Discuss this news item on our forums: forums.xbox-scene.com
Xbox 360 gaining USB storage support in 2010 update
>> From joystiq.com:
[QUOTE]
Documentation obtained by Joystiq - and subsequently confirmed with two separate sources - reveals that "USB Mass Storage Device Support on Xbox 360" will soon be a reality. The document, authored by a senior software development engineer at Microsoft, states that due to "increased market penetration of high-capacity, high throughput USB mass storage devices, a 2010 Xbox 360 system update" will allow consumers to save and load game data from USB devices. The update is purportedly coming in Spring 2010.
Once the update occurs, Xbox 360 owners will be able to download Xbox Live Arcade games, Xbox Live Indie games, Games on Demand, DLC and Title Updates to the storage device. "USB storage devices may, however, have far greater memory capacity than MUs (at the date of writing, the largest MU is 512 MB), and may therefore support previously infeasible operations-such as installation of a full disc-based title." That's right, you can also store disc-based games to the USB device; however, it will require the disc to be in the tray for authentication, identical to the current functionality.
According to the document, the USB mass storage device must be at least 1GB and the system will do a compatibility check. "The system partition occupies 512 MB of space, and by default the consumer partition occupies the remainder of the device capacity, or 16 GB, whichever is smaller." Upon inserting a blank USB storage device, "consumers are offered two choices: 'Configure now' or 'Customize'." The "Configure now" option will use "the entire device capacity, up to the maximum of 512 MB plus 16 GB" meaning, regardless of the overall size of the device you're using, the Xbox will only enable 16 GB of usable, non-system storage. The "Customize" option will allow you to "preserve some pre-existing, non-console data on the device" such as music.
[/QUOTE]
Full Story: joystiq.com
Discuss this news item on our forums: forums.xbox-scene.com
Maximus NANDFlasher
>> Maximus announced his NANDFlasher for Xbox360:
[QUOTE]
What is the NANDFlasher?
THE FIRST PROFESSIONAL TOOL FOR ALL YOUR XBOX 360 HOMEBREW NEEDS !!
The nandflasher is basically a JTag device that lets you read and write to the X360 NAND. This requires an Exploitable console. Hmm, is my console xploitable? Well if you have a dash kernel before 8xxxx and the console was manufactured before Jun 18, 2009, then you most likely can use this device.
[/QUOTE]
A bit more details about the device was posted on eurasia.nu:
[QUOTE]
The product is scheduled to ship on March 26 with a retail price around USD $45. The 360 NAND Flasher will be available in two flavors; one with plastic shell (translucent-blue) and the other with clear heat-shrink plastic. The kit also includes a wiring system which will greatly reduce the install time.
[/QUOTE]
Official Site: http://www.360nandflasher.com
Pre-Order NANDFlasher: here
Discuss this news item on our forums: forums.xbox-scene.com
Rumor: Xbox 360 Valhalla chipset pictured, 360 Slim? *Update*
>> From hexus.net:
[QUOTE]
An image of what is believed to be a forthcoming Xbox 360 chipset revision has been leaked onto the Internet.
The board, pictured below, is said to be the successor to the current chipset - codenamed Jasper - and features both the Xbox 360 GPU and CPU on a single die.
The combination of the two is thought to have been made possible by a die shrink, presumably to 45nm.
Thought to be codenamed Valhalla, the chipset appears to be a drastic redesign from current Xbox 360 boards. The Valhalla PCB (printed circuit board) appears to be smaller than all previous iterations, and a shuffle of I/O port positioning suggests that the board will surface in a new Xbox 360 chassis.
[/QUOTE]
*UPDATE* Here's an image of the CPU/GPU 'combochip' with the heatsink removed.
News-Source: hexus.net | bbs.a9vg.com
Discuss this news item on our forums: forums.xbox-scene.com
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Wednesday 17 March 2010 10:25 EST) - (Category: Xbox360) - (Posted by::
)
MS: Blu-ray absence key to 360 outselling PS3
>> From computerandvideogames.com:
[QUOTE]
Microsoft's Aaron Greenberg has claimed that Xbox 360 has "nearly twice" PS3's installed base - partly because its lack of a Blu-ray drive allows it to be sold at a more attractive price point.
The Xbox product director claimed that "being $100 cheaper [than PS3] is part of the reason we're nearly twice their installed base".
It's likely he was referring to Xbox 360's North American installed base, with 360 and PS3 widely reported to be neck-and-neck in Europe.
"Sony bet on the physical disc, and there are costs associated with that," Greenberg told Edge magazine.
"The fact that we're able to offer a console starting at $199 is a benefit of not being burdened with that cost."
[/QUOTE]
Full Story: computerandvideogames.com
Discuss this news item on our forums: forums.xbox-scene.com
Hacked Xbox1 Backwards Compatibility v5829 Leaked
>> A hacked version of the Xbox1 Backwards Compatibility v5829 (November 2007) has been leaked yesterday. It wasn't supposed to be out (yet), but as it's all over the internet now I guess we could just mention it too. Was originally made for devkits, but should work just fine on jtagged homebrew 360s too:
[QUOTE]
I've attempted to remove any limits on the emulator, although i left in game ratings checks in case you dont want your little ones to play violent games :)
This can be toggled in the dashboard anyway. The following hacks were done to the emulator:
* Xbe signature checks removed (lets you run unsigned code)
* Xbe section hash checks removed (lets u run hacked xbes)
* Game region checks removed (region free baby!)
* Game media checks removed (play games from your hard drive)
* Debug/Devkit xbes supported (run your own xbox1 code)
* Attempt to play unsupported games (doesn't mean it will work hehe)
To install this, copy the Compatibilty folder to your devkits Y drive.
You may want to remove any existing files, although this should overwrite all files.
[/QUOTE]
Note: it will boot (some) Xbox1 homebrew as well, however don't expect everything to work perfectly. And no ... XBMC will not run fully on it (don't expect video playback etc).
Official Site: n/a, leaked
Download: n/a (contains MS copyrighted code)
Discuss this news item on our forums: forums.xbox-scene.com
Xecuter CK3-CP Update, XFRAG 360, CK3 Probe v2 and New LT Switch v1.5
>> Lots of news from Team Xecuter:
[QUOTE]
+++ Xecuter CK3-CP Update
The Xecuter CK3-CP is the crown jewel in the range of CK3 products. We have combined all the functionality of the CK3 Pro plus into a fully featured PC driven LCD Display & Control Panel, not to mention a slew of new automated features. Please note that the following image is a prototype. We expect to begin shipping sometime in April 2010.
* Fits into any 5.25″ PC bay
* 2×16 Custom Design LCD Display
* 4 x Button Directional Keypad (e.g Jungle Flasher No-Mouse Operation)
* 1 x SATA Port
* 2 x USB 2.0 Ports
* CK3 Power Connector for any XBOX 360 DVD Drive
* Xbox 360 DVD Eject Button
* IVM (Intelligent Vendor Mode) - Software can control DVD Power and Eject (inc half tray) for fully automated DVD fw access (vendor mode etc)
* 2 x Programmable LED's (Many uses with apps like Jungle Flasher)
* When not being used for CK3, the LCD can be used to display ANY information (Huge Possibilities)
* LCD Smartie open source software is fully compatible with the LCD. Includes custom driver.
* The LCD display is fully customizable from the PC, including the directional pad and the notification LED's.
* LCD backlight and contrast are software controllable.
* The simplified and robust protocol allows anyone from hobbyists to professionals to interface the CK3 CP.
* Great for displaying system statistics like temperature, cpu usage, and ram.
* Compatible with all versions of Windows. Most linux distributions and even PowerPC and Intel Macintosh systems.
CK3 Related (Sources and info available for 3rd party software developers)
* IVM (Intelligent Vendor Mode) - DVD Power and Eject (inc half tray) full software controlled
* The LCD display can guide you step by step when flashing a 360 drive (or other app functions)
* Any input inquiry can be done right on the directional pad - and also an OK/ENTER button.
* No need to keep looking to the monitor or fiddling with the mouse to control the PC for the next step.
* Metal frame means the unit is sturdy and reliable.
* CK3-CP works with all current 360 drives.
* Industry standard, PL2303 transceiver for communication. This means you get great stability and compatibility.
+++ Xecuter XFRAG 360 Launched
The Xecuter XFRAG 360 is the ultimate accessory for the hardcore gamer who craves the accuracy and freedom of using their beloved keyboard and mouse on an Xbox 360. We have looked at other products on the market and taken it to the next level by looking at gamers wish lists and then fine tuning every aspect of quality and performance and giving it to you at a price that doesn't break the bank.
This device is not meant for the average gamer who likes to take pot shots at tin cans, this is for the gamer who loves to frag the living hell out of anything that moves - whether it be Call Of Duty, Gears of War, Rainbow Six or Halo - you will simply OWN anything that crosses your path. For the discerning Playstation addict - you can even connect a PS2 DualShcok2 controller to your Xbox 360 (though why anybody would prefer the PS2 controller over the soul-soothing goodness that is a 360 controller is beyond us) - we've added it anyway !
We have struck a deal that will see this distributed in several global high street retail chains so you can be sure to be able to get your hands on one of these for only $69.95 ! (Similar products sell for upto $100)
Features:
* Connect a PS/2 or USB keyboard & Mouse to the Xbox 360
* Connect a Playstation DualShock2 controller to the Xbox 360
* All Xbox 360 buttons including analogue can be mapped to any keys on the keyboard
* Rapid Fire and Auto Fire Function (8 Customizable Buttons)
* Adjustable X&Y Mouse Sensitivity
* Compatible with most PS/2 or USB Keyboard & Mouse combination's
* Compatible with all Xbox 360 Games
* Compatible with all Xbox 360 Console Versions
* Compatible with both CL & the new Matrix Xbox 360 Wired Controllers
* Connect any PS2 peripheral including Guitars, Dance mats, Light Guns, Racing Wheels etc
* Trusted Xecuter Design & Quality
+++ CK3 Probe v2 First Batch Available & New LT Switch v1.5
As previously announced the CK3 Probe v2 shipment was on hold due to the delay on the custom made conductive glue shipment. Due to the quantity it was not allowed to be flown on a airplane so had to be transported by ship (which has caused an 8 week delay). However we have been inundated with requests to release a batch of the stock without the glue as many of you are simply prepared just to do the trace repairs yourselves. Naturally we have instructed the resellers who are selling without the glue to give a discount and to make sure that you are made aware that the glue is not included. It is on its way so if you are desperate for the no-solder solution then you'll have to wait a couple more weeks.
The good news is that while we were waiting for the glue we had time to add a new feature called MULTI-R which is also a new feature that we have added to an upgraded version of the ridiculously popular LT Switch.
With the help of TeaJunkie on our forums who has become somewhat of a go-to guy for repairing Liteon PCB's that some of you had butchered in a frenzy of solder-hate, we discovered a very small number of DVD drives that simply would not switch to vendor mode. Now before a thousand of you who couldn't get 0×72 vendor mode start waving your hands, the number of returned drives with this error was 2 out of 63 drives. The majority of the time it was user error. However even if there is a small chance of an issue, we had to find a solution and implement it. After input from other experienced members and various articles on the same problem, we found that the LT Switch default resistor level of 20 Ohms could sometimes be too much or not enough for a small number of DVD drives (we found that the majority of drives that ever showed this issue were the Liteon 93450). So our solution once again lends itself to the process of K.I.S.S (KEEP IT SIMPLE STUPID) - We added a switch bank so you could choose your level of resistor :) Your options are 18 Ohms, 20 Ohms (Default) and 22 Ohms. We have called this feature "MULTI-R" and it has now been implemented on the LT Switch v1.5 and the CK3 Probe v2.
We have also made sure that unlike other products, the underside of the PCB is protected against shortages from any exposed PCB traces (as implemented on the LT Switch v1)
The New Designed LT Switch v1.5 with MULTI-R. On Sale From March 28th £5.95 / $8.95 (Bulk Discounts Available As Usual).
....and the new design CK3 Probe v2 with MULTI-R Feature. Note we have also color coded the Probes so they can be easily identified. Remember that unlike other products, the CK3 Probe v2 also has Probe v1 Support (Liteon 74850 Key Dump with No Trace Cuts), has its own power isolator switch so you can be completely safe against shortages even if your CK3 is turned on and no rebuild PCB's to solder. The new custom made conductive glue is absolutely fantastic and as soon as that's ready to ship we will let you know. In the meantime you can buy the CK3 probe v2 without the glue for just £11.95 / $17.95 - Stock is expected to arrive before March 28th.
[/QUOTE]
Official Site: http://team-xecuter.com
Reviews of LT Switch, CK3 Pro, Blaster CK3 by Team Jungle: here, here and here
Discuss this news item on our forums: forums.xbox-scene.com
PCEngine360 Alpha v0.1
>> Yoshihiro released PCEngine360 Alpha v0.1 for homebrew Xbox360s:
[QUOTE]
This is an alpha release, the first one written and coded for the xbox 360 so this emulator has been only coded in big Endian.
It can emulate every Nec PCENGINE games and only the hardware mouse is missing.
This emulator is not a port but a full writen emulator for the xbox360 based on every docs and paterns about PCE hardware and i used hugo for the arcade Card support.
supergraphx doc , pce sound generator , CDROM io , pads ,VDC , VCE ect.. .
How to use this emulator :
put every games pce , sgx , Arcade CD , cdrom images inside the pceroms folder dont forget to put the bios rom inside the bios folder renammed as syscard.pce
This emulator needs the SuperCD Card 3.0 bios to play CDROM games .
supported formats for Hucard zip , gz , pce , sgx .
supported formats for CD game images : .iso and .bin.
[/QUOTE]
Official Site: n/a, by Yoshihiro
Download: n/a (built with XDK)
News-Source: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
|
|
|
|
|
|
|
